Aerial Specialists Inc. USA - AWPT-Inspection Form

Vertical "Manual & Electric" Personnel Lift Check List

Manufacturer:	Model:			Serial Number:

Condition of Unit:
<-Excellent		<-Good	<-- Fair	<--Poor

Recommended Maintenance Inspection Schedule -->					Daily	Weekly	Monthly	Quarterly	BI - Annual	Annual

Wash Machine							XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Factory "add-on's" incl: "Self-Loader Options" for Proper Operation and Wear or Binding					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXX

Check Hyd Fluid Level & ADD (as recommended in Factory Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for Structural Damage & Broken Welds					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for LOOSE and/or Missing Bolts or Retaining Set Screws					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Grease ALL Zerks - Vertical MAST & CASTERS					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check CASTERS (If equipped) for damage and/or loose running gear					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for OUTRIGGER OPERATION and Lubricate - (as Required)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Lubricate & CHECK MANUAL Vertical Mast Crank-Up Assy					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check HOLD BRAKE on MANUAL Vertical Mast Crank-Up Assy					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Lubricate ALL Vertical Mast Cables, Chains and Pulleys					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Vertical Mast Wear Pads for wear or binding					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Vertical Mast for EXCESSIVE SWAY!					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Inspect ALL Vertical Mast Cables, Chains and Pulleys					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Adjust ALL Vertical Mast Cables, Chains - (as REQUIRED in Manual)							XXXXX	XXXXX	XXXXX	XXXXX

REPLACE ALL Vertical Mast Cables, Chains - (OR as REQUIRED in Manual)										XXXXX

Check Hyd Pressure (Not to EXCEED Mfg Recommendation in Manual)							XXXXX	XXXXX	XXXXX	XXXXX

Change Hydraulic (Return) Filter - (If Equipped)							XXXXX	XXXXX	XXXXX	XXXXX

Change Hydraulic (In-Line Pressure) Filter - (If Equipped)								XXXXX		XXXXX

Change Hydraulic (In-Tank) Filter(s) - (If Equipped)								XXXXX		XXXXX

Change HYDRAULIC OIL - (If Equipped) as RECOMMENDED IN MANUAL									XXXXX	XXXXX

Check Hyd Pump Motor Assy for Fitting Leaks & Noises					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for Proper LIFT Operation - (as Recommended in Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check EMERGENCY Lowering Valve Operation- (If Equipped)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for proper LIFT Control Valve Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Mast Wire Rope or Chain Guards					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check MAST LIFT CYL PIN(s) for Wear or Broken Retaining Pins					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Basket Platform for ALL Guard Rail Misc. Hardware					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for Bent Guard Rails					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Guard Rail Chains and/or Entry Slide Bar					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check BASKET for FOLD-DWN Lock Pins Misc. Hardware					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

LOAD TEST Basket Platform @ RECOMMENDED RATED LOAD!							XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Hoses and Wire Harnesses for Cuts and Abrasions					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Machine COMPLETE for leaks					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Wiring Connections for Tightness							XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Upper & Lwr Control Switches for Proper Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check "Cord Storage" Operation - (if applicable)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Platform for ORIGINAL Factory Operations Handbook					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Ensure that ALL Safety & Warning Deals & Placards are on unit					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Run unit thru Several FULL CYCLES for Proper Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Give THOROUGH - "VISUAL INSPECTION!"					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX